Removing it can be a challenge if you’re tired of your lace front wig and are ready for a change. Glue is typically used to apply the wig, so you’ll need to take extra care when removing it. This article will show you how to remove a lace front wig with glue, step by step. You can say goodbye to your old look and hello to something new with our tips!
A wig is an essential part of many women’s lives. It can be used for special occasions or every day. Wigs come in different styles, colors, and lengths. They are made from human hair, synthetic fibers, or both. A lace wig is a wig that has a strip of lace material along the hairline. The lace wig is glued or taped to the skin to create the illusion of a natural hairline.
A Detailed Guide on How to Remove a Lace Front Wig With Glue
Method 1: Use Lace Front Wig Glue Remover
Wig glue remover is a product used to dissolve the adhesive bond between the wig and your skin. There are different wig glue removers available on the market, but we recommend using a lace front wig glue remover since it’s specifically designed for this purpose.
You will Need:
- Lace front wig glue remover
- Cotton balls
- Water
- Paper towels
Steps:
- Pour a small lace front wig glue remover onto a cotton ball.
- Gently massage the adhesive bond between the wig and your skin with the cotton ball until the glue remover dissolves the adhesive.
- Rinse your face and neck with water to remove any residue from the wig glue remover.
- Dry your face and neck with paper towels.
- Repeat steps 1-4 until the adhesive bond is completely dissolved.
Method 2: Use Warm Water Mixture
If you have a lace front wig glued on with a water-based adhesive, you can remove it at home with a simple warm water mixture.
You will Need:
- A bowl of warm water
- A few drops of dish soap
- A clean towel
- A hairdryer (optional)
Steps:
- Fill a bowl with warm water and add a few drops of dish soap.
- Gently submerge the lace front wig in the water and let it soak for a few minutes.
- Use your fingers to loosen the adhesive from the lace front wig.
- Rinse the wig under warm water until all adhesives have been removed.
- Towel dry the wig and use a hairdryer to speed up the drying process (optional).
- Put the wig back on its original packaging or store it in a Ziploc bag until you can use it again.
Method 3: Use Acetone
Acetone is a solvent that can remove adhesives and other substances from surfaces. It is also an effective way to remove lace wigs glued to the skin. In addition, acetone is a powerful solvent that can dissolve the adhesive used to attach a lace front wig. It can be purchased at most drugstores or hardware stores.
You will need:
- Acetone
- A bowl or container
- Cotton balls or pads
- Alcohol wipes or pads
- A towel
- A shower cap (optional)
Steps:
- Pour acetone into the bowl or container.
- Saturate a cotton ball or pad with acetone and apply it to the glued area.
- Leave the acetone on for a few minutes to dissolve the adhesive.
- Use your fingers or a wide-toothed comb to lift the wig off your head gently. If the wig is resistant, re-apply acetone and wait a few more minutes.
- Once the wig is removed, use alcohol wipes or pads to clean the glue residue from your skin.
- Rinse your hair with shampoo and conditioner to remove any remaining acetone.
- Towel dry your hair and style as usual.
Method 4: Use Rubbing Alcohol
Rubbing alcohol is an effective solvent for many adhesives, including the type used to attach lace wigs. When applied to the wig line, it will help to break down the adhesive bond and make removal easier.
You Will Need:
- Rubbing alcohol
- Cotton balls
- Lace wig adhesive remover
- Scalp protector
- Plastic bag
Steps to Remove the Wig:
1. Soak a cotton ball in rubbing alcohol and apply it to the wig line.
2. Gently rub the cotton ball along the wig line to help break down the adhesive bond.
3. Apply a small amount of lace wig adhesive remover to a cotton ball and gently wipe away any remaining residue.
4. Apply a scalp protector along the wig line to help protect your skin from the rubbing alcohol.
5. Place the wig in a plastic bag and seal it tightly.
6. Leave the wig in the bag for 24 hours to allow the rubbing alcohol to break down the adhesive bond fully.
7. After 24 hours, remove the wig from the bag and gently peel it away from your skin.
8. Wash your hair and scalp with a gentle shampoo to remove any residue.
Method 5: Use Vaseline petroleum jelly
Vaseline petroleum jelly is a heavy, viscous substance that coats the hair and seeps into the lace front wig adhesive. Once it sets, the adhesive will become brittle and can be easily removed with a comb or your fingers.
You Will Need:
- Vaseline petroleum jelly
- Q-tip
- Small bowl or container
- Towel
Steps:
1. Dampen your hair around the perimeter of the lace front wig with water. This will help the Vaseline to spread evenly.
2. Apply a thick layer of Vaseline to your hairline and all around the perimeter of the wig. Be sure to get it in all the cracks and crevices, making removal much more accessible.
3. Rub the Vaseline into the adhesive with your fingers or a Q-tip until completely coated.
4. Let it sit for at least 30 minutes, or overnight if you can.
5. To remove the wig, peel it off gently, starting at one corner. If the wig is stuck in places, use your fingers or a wide-toothed comb to loosen it and then continue peeling.
6. Once the wig is removed, wash your hair and scalp with a gentle shampoo to remove any residue.
Tips and Advice
- If you find that the wig is still resistant to removal after following the above steps, you may need to Repeat steps 1-3 until the wig slides off easily.
- Be sure to test the rubbing alcohol on a small area of skin before applying it directly to the wig line. Some people may be sensitive to alcohol and experience irritation.
- Adhesive removers containing acetone can also dissolve the glue, but take caution when using these as they can be harsh and may damage the wig.
- If all else fails, you can also try cutting the wig off at the hairline. However, this should only be a last resort as it can damage the hairline and make future wig applications more difficult.
Conclusion
So, there you have it. A step-by-step article on how to remove a lace front wig with glue. We hope this was helpful and that you will be able to clear your wig without any problems successfully. If you have any questions or need further assistance, please comment below.
You can check it out to Get Fly Paper Glue Off Skin
About the Author
Jane Hubbard is a passionate beauty expert with a wealth of experience in makeup, hair, and overall beauty techniques. After years of working as a hairdresser specialist, she followed her entrepreneurial spirit and started her own consultancy business.
Jane has always been driven by her desire to help others feel confident in their own skin, and she does this by sharing her knowledge, experiences, and practical beauty tips. Through her consultancy, she empowers individuals to embrace their unique beauty, offering tailored guidance that boosts both self-esteem and personal style.
Professional Focus
- Specializes in makeup, hairstyling, and beauty consulting.
- Provides personalized beauty advice, tips, and techniques to help individuals feel confident in their appearance.
- Dedicated to staying up-to-date with the latest industry trends and developments.
- Passionate about creating a comfortable and empowering experience for every client.
Education History
- University of Craft and Design – Bachelor of Fine Arts (BFA) in Woodworking and Furniture Design
- Woodworking Apprenticeships – Extensive hands-on training with skilled craftsmen to refine carpentry and furniture making techniques
- Online Courses & Masterclasses – Continued education in advanced woodworking techniques, design principles, and specialized tools
Expertise:
- Makeup artistry, hairstyling, and beauty consulting.
- Personalized beauty techniques to enhance confidence and self-expression.
- Educating clients on how to maintain their beauty routines at home.